Contact us about us Employment


RPM Solutions, Inc. Rapid City, SD

Products and Services -> Atomizer Parts - New

Atomizer Parts - New
 400mm Titanium Wheel | 350mm Titanium Wheel | 250mm Titanium Wheel | 240mm Titanium Wheel
 Atomizer Nozzle Design | Cone Nut Design Changes | Upper Wear Ring-Ceramic-Modified-Titanium
 Center Distribution Plate-Intermediate | Reverse Taper Nozzle

Center Distribution Plate-Intermediate

Center Distribution Plate-Intermediate (CDP-I) design reduces vibration RPM Solutions developed a Center Distribution Plate-Intermediate (CDP-I) and resolved the vibration issues experienced at a plant utilizing the standard short version of this component.

The atomizer routinely experienced spikes in vibration at approximately 125 gallons per minute. In some cases, these vibration spikes would trip the atomizer offline making the atomizer unreliable.

The graphs below illustrate the vibration readings experienced before and after the CDP-I was installed. The CDP-I continues to operate at normal conditions (50 to 200 gallons per minute) with minimum vibration variance. The same results were experienced with the other atomizers at this plant.

Slurry Feed Rate vs. Spindle Vibration - Center Distribution Plate-Short (CDP-S) Design

Day 4 - Center Distribution Plate-Intermediate installed

Slurry Feed Rate vs. Spindle Vibration - Center Distribution Plate-Intermediate (CDP-I) Design

The implementation of the CDP-I dramatically reduced the amount of atomizer trips and made the operation of the plant’s atomizers consistent and reliable.

About RPM Solutions

About RPM and Associates (0)

The Atomizer Monitoring System provides the tools to help you manage all aspects of maintaining your Atomizers. Save Time. Save Money. Improve Safety. Find out how ...